Hyundai MWE2117W, Инструкция по эксплуатации

Страница: 38 / 64

EN - 38
To Reduce the Risk of Injury to Persóna Grounding Installation
DANGER
Electric Shock Hazard Touching some of the internal components can
cause serious personal injury or death. Do not disassemble this appliance.
WARNING
Electric Shock Hazard Improper use of the grounding can result in electric
shock. Do not plug into an outlet until appliance is properly installed and
grounded.
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly grounded. If it is
necessary to use an extension cord , use only a 3-wire extension cord.
1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled
in or tripping over a longer cord.
2. If a long cord set or extension cord is used.
1) The marked electrical rating of the cord set or extension cord should be at least as great as
the electrical rating of the appliance.
2) The extension cord must be a groundingtype 3-wire cord.
3) The long cord should be arranged so that it will not drape over the counter top or tabletop
where it can be pulled on by children or triplex over unintentionally.
UTENSILS
CAUTION
Personal Injury Hazard
It is hazardous for anyone other than a compentent person to carry out any service or repair
operation that involves the removal of a cover which gives protection against exposure to micro -
wave energy.
See the instructions on “Materials you can use in microwave oven or to be avoided in microwa -
ve oven.” There may be certain non-metallic utensils that are not safe to use for microwaving. If
in doubt, you can test the utensil in question following the procedure below.
Utensil Test:
1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in
question.
2. Turn on maximum power for 1 minute.
3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking.
4. Do not exceed 1 minute cooking time.
5. Take out the utensil from the microwave oven.
Two-round-pin plug