Hyundai MSR 568 D3, Руководство пользователя

Страница: 73 / 88

ENG - 73
PUTTING THE BATTERIES INTO THE REMOTE CONTROL UNIT
Press down of the compartment cover, and slide
the cover off to open the compartment. Place the
two (UM4), (AAA), (R03) batteries in the remo -
te control according to the polarity markings („+“
and „ - „) inside the compartment and on the batte -
ries. Place the cover over the compartment, press
down lightly, and push it upward until it snaps on.
NOTE : Remove the batteries from the remote
control if not in use for long period of the time.
Do not mix normal batteries with rechargeable
batteries, when the batteries become weak, remo -
te control will not function and replace with new
batteries.
NSTALLING THE SPEAKER WIRE TO THE SPEAKER TERMINALS
1. Speakers Connection
Extend the SPEAKER WIRES and connect them
to the SPEAKER TERMINALS.
2. Power Cord Connection
Before using, connect the AC Power Cord to
the AC outlet. then turn on the main switch
of the unit.
OPERATING THE UNIT
When you first plug the unit into the AC outlet ,the unit will be in standby mode , You can
press the POWER/STANDBY button on the unit ( or on the remote control ) to switch the unit
ON or OFF. Pull the AC plug out of the wall socket if you want to switch off completely..
POWER/STANDBY
1. Press STANDBY button on the unit (or remote) to switch the unit on.
2. Select the sound source (CD, USB, CARD ,TUNER , AUX IN or TAPE ) by pressing FUNCTI
ON button. The corresponding display will light up.
3. Adjust the volume with the VOLUME (UP or DOWN) control knob.
4. Set the preset equalizer ( flat, rock, classic, jazz, or pop) with the EQ button on the remote.
5. Press STANDBY button again to turn off the unit.
ENG