Hyundai MSD761DRSU, Инструкция по эксплуатации

Страница: 71 / 92

ENG
ENG - 71
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via the
FL and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF RAW: The digital audio signal output will be in its raw format. Normally, this mode is used
for DTS & Dolby Digital 5.1 signals.
SPDIF PCM: The digital audio signal output will be in PCM format. Normally, this mode is used
for audio CD signals.
2.2.2 LPCM OUTPUT
When DIGITAL OUTPUT is set to SPDIF PCM , this item is available.
Select a sample rating for the digital audio output. There are two options, 48KHz and 96KHz.
NOTE: Some amplifiers don‘t support 96KHz sampling which will affect the coaxial output.
2.3 hDCD(high Definition Compatible digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for delivering
the full richness and details of the sound from HDCD-encoded Cds.
You can select the digital filter at 2x, 1x or off.
2.4 KARAOKE SETUP
2.4.1MIC SETUP
2.4.1.1 MIC
Set this item to ON/OFF to switch on/off the connected microphone.
2.4.1.2 MIC VOL
Enter this item, then use direction key [ ]/[ ] to adjust the microphone volume. Then press [EN -
TER] to confirm your adjustment.
2.4.1.3 EChO LEVEL
Enter this item, then use direction key [↑]/[↓] to adjust the microphone echo level. Then press
[ENTER] to confirm your adjustment.
3 DOLBY DIGITAL SETUP
3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR
speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO: The player outputs the average signal of the left-channel and right-channel audio
via the FL speaker and the FR speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 2-channel discs.
3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can
adjust the dynamic value up to avoid losing sound details resulting from the low volume.