Hyundai L365, Руководство пользователя

Страница: 20 / 21

Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications
Commission (FCC) standards that limit human exposure to radio
frequency (RF) energy emitted by radio and telecommunications
equipment. These standards prevent the sale of mobile devices
that exceed a maximum exposure level (known as the Specific
Absorption Rate, or SAR) of 1.6W/kg. SAR information on this and
other model devices can be accessed online on the FCC’s website
through transition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be much lower, as the
device has been designed to emit only the RF energy necessary to
transmit a signal to the nearest base station. By automatically
emitting lower levels when possible, your device reduces your
overall exposure to RF energy.
The FCC has granted an Equipment Authorization for this model
device based on the compliance of all reported SAR levels with the
FCC RF exposure guidelines. This device has a FCC ID number:
2AZP5-FS28001 [Model Number : L365] and the specific SAR
levels for this device can be found at the following FCC website :
www.fcc.gov/oet/ea/ .
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.