Put the container to the vacuum cleaner in the opposite direction and secure it by snapping
in the locking button
A3
. For sanitary reasons we recommend emptying the container outside
housing premises.
Cleaning the dust
container and cleaning the filter
After about 5 emptying of the container we recommend complete cleaning of the suction
system from the settled dust. Clean all parts (i.e. the container, the filter protector and the
filter) in running lukewarm water (e.g. using a cloth or a soft brush) and let it dry completely
(Fig. 10). Re-assemble individual parts in the opposite direction after it is completely dry.
Filter replacement
Disassemble the movable parts of the cleaner for changing of the filter (pic. 8). Slide the
new filter on and fix it thoroughly reversely.
Storing accessories
You may put the accessory (
D, E, F
) into the holder
C
, orto a safe place. Store the adaptor
G
on a safe, dry and dustless place inside the house, keep it out of reach of children and
persons sui juris.
IV. MAINTENANCE
Disconnect the charger from the appliance before any maintenance. Store the vacuum
cleaner at a dry place, far enough from heat sources (e.g.
fireplace, stove, heating
element
) and protect it against weather conditions (e.g.
rain, sunshine
). Treat the surface
of the vacuum cleaner and the charger (only when disconnected from the electric socket)
with a wet cloth, do not use abrasive and aggressive cleaning agents! Never dry plastic
moldings over a heat source (e. g.
heater, electric/gas stove
).
CAUTION
– The maximum suction effect will be reached by a clean filter and an empty container.
– Do not use any aggressive washing or cleaning agents or hot water to clean the filter.
– The filter is not intended for washing in a dishwasher.
–
Cleaning the filter will not restore its original colour, but it will restore its filtration properties.
– Neglecting filter cleaning may lead to breakdown of the vacuum cleaner!
– Make sure that the binding surfaces and sealing elements are functional.
– We recommend replacing the filter twice a year or when it cannot be cleaned properly
or if it is damaged. You can buy a replacement filter in the elektro shop chain.
Removal of the battery
Remove the batteries from the appliance only when they are completely discharged
(i.e. let the vacuum cleaner running until its motor stops). Screw out all bolts and open the
vacuum cleaner. Gradually disconnect the lead-in wires of batteries and remove the battery
(Fig.11).
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
V. TECHNICAL DATA
Voltage (V)
specified on the type label of the appliance
Input (W)
specified on the type label of the appliance
Protection class appliance
III.
Battery
4,8 V
Charged
230 V~ / 6,4 V=, 1,5 W, 200 mA
GB
GB - 25
