ENG
21 / 30
20
• After putting the cover and driving unit to the vessel the safety device shall release and the
appliance can be switched on.
• Do not exceed the maximum continuous operating time of the appliance, it´s 30 sec.
• Do not switch the appliance without materials put in!
• Let the rotating parties stop completely before taking off the driving unit from the vessel.
• Before emptying the vessel take off the sickle-shaped knife first.
• While handling the sickle-shaped knife be careful as it is very sharp. You have to be very
careful while handling the sickle-shaped knife mainly while taking it off the vessel, at emptying
the vessel and during its cleaning.
• Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
• It is not allowed to modify the surface of the appliance in any way (e.g. using a selfadhesive
wallpaper, foils, etc.)!
• When leaving the appliance without supervision, always detach it from the power supply.
• Do not process foodstuffs having higher temperature than
about 80 °C
.
• If the processed foodstuffs start to stick on the accessories (e.g.
on knife or on the vessel
),
switch off the appliance and clean the accessories carefully (
e.g. with a spatula
).
• Supply cord must not be damaged by sharp or hot subjects, by open flame and it must not be
immersed in water.
• If you need to use extension cable it must not be damaged and it must comply with the valid
standards.
• Never use the appliance for other scope than for which it was intended and described in the
present instructions!
• The manufacturer does not answer for damages caused by wrong use of the appliance and
its accessories (e.g.
devaluation of foodstuffs, injury by knife-edge, fire
) and he does not
guarantee for the appliance if the above stated security advices have not been observed.
DESCRIPTION Of THE APPLIANCE AND Of ITS ACCESSORIES
(Fig. 1)
A – Driving unit
A1 – Switch
A2 – Safety device
A3 – Supply cord
B – Cover of the vessel
B1 – Securing projection
(it activates and deactivate
the safety device)l
C – Glass vessel
C1 – Central shaft
D – Antiskid pad
E – Sickle-shaped knife
Содержание HYUCHO 160
Страница 35: ...Poznámky Notatka Notes Megjegyzés ...
Страница 36: ...Licensed by Hyundai Corporation Korea ...
