Hyundai HY3810, Инструкция по эксплуатации

Страница: 17 / 20

Tensioning the chain
The chain tensioning screw is located on the right side of the device
under the tensioner nut.
·
Tighten the chain tensioning screw with a screwdriver to tension the
chain.
·
Unscrew the screw to release the chain.
Sharpening the chain
A round file and a template is used for grinding the cutter teeth. For
information on the recommended dimensions of the
file, see the Specifications section.
Grinding procedure:
1. The chain must be properly tensioned.
2. Put the file on the cutter tooth at an angle of the tooth blade travel.
3. The file can only move forward. When returning, lift the file from the
tooth.
4. First, grind all the teeth on one side, then on the other side of the
chain.
Other
Check for fuel leaks, untightened screws, damage of main parts,
especially on the coupling handle and chain bar. If you find any errors,
you must correct them before using the device again.
Storage and transport
Keep the device in a dry place out of the reach of children. Before
storing for a longer period of time, it is advisable to empty the fuel tank
and chain oil. Guide bar of the chainsaw should be covered with a
shield when not in use.
When transporting the device, use appropriate protection for the guide
bar of the chain. Carry the device with the engine off and with the guide
bar facing backwards, turn the silencer away from your body. Improper
maintenance and removal or changes in safety components can lead to
injuries.
SERVICING
For any repairs during the warranty period or after it, please contact an
authorised repair service, which will gladly help you. If the power cord is
damaged, we recommend that, for safety reasons, you contact an
authorised repair service, which will replace the cord.
Before you hand over the device to a repair service, clean it and
put it the original packaging.