Page 5
2.4.7.
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
2.4.8.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
2.5.
Service.
2.5.1.
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
3.
SPECIFIC SAFETY INSTRUCTIONS
Read the laser safety information carefully and follow all safety precautions. Not
following safety precautions could result in hazardous radiation exposure to your
eyes. Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
The laser should never be tilted or turned over while the laser indicator is lit.
The laser energy is not dangerous to exposed skin. However, if viewed directly or
form a reflection of a specular (mirror-like) surface, the emitted light from those
sources may be harmful to the human eye.
3.1.
Laser.
3.1.1.
Do not stare into beam during operation.
3.1.2.
Do not project the laser beam directly into the eyes of others. Serious eye injury could
result.
3.1.3.
Do not place the laser in a position, which may cause anyone to stare into the laser beam
intentionally or unintentionally.
3.1.4.
Do not use optical tools to view the laser beam.
3.1.5.
Do not operate the laser around children or allow children to operate the laser.
3.1.6.
Turn the laser off when it is not in use.
3.1.7.
If laser device not were used for longer time, you shall remove the batteries;
3.1.8.
Do not attempt to repairs the laser device by yourself
3.1.9.
Do not attempt to change any parts of the laser device by yourself except batteries
3.1.10.
Any repairs must only be carried out by the laser manufacture or authorized service agent.
3.2.
Keep hands away from cutting area and the blade. Keep your second hand on motor hosing.
3.3.
Do not reach underneath the work piece.
3.4.
Adjust the cutting depth to the thickness of the work piece.
3.5.
Never hold piece being cut in your hands or across your leg. Secure the work piece to a stable
platform.
3.6.
Hold power tool by insulated gripping surface when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
3.7.
When ripping always use a rip fence or straight edge guide.
3.8.
Always use blades with correct arbor hole for the too.
3.9.
Never use damaged or incorrect blade washers or bolt.
Содержание HY2163
Страница 12: ...Page 12 ...