Hyundai HX260A L, Руководство по обслуживанию

Страница: 33 / 41

1-19
Lift-point
height (A)
Lift-point radius (B) At max. reach
3.0 m (9.8 ft) 4.5 m (14.8 ft) 6.0 m (19.7 ft) 7.5 m (24.6 ft) Capacity Reach
m (ft)
7.5 m kg *7270 *7270 5.55
(24.6 ft) lb *16030 *16030 (18.2)
6.0 m kg *7460 *7460 *7010 6810 *7100 5540 6.77
(19.7 ft) lb *16450 *16450 *15450 15010 *15650 12210 (22.2)
4.5 m kg *9290 *9290 *7660 6580 6940 4610 7.49
(14.8 ft) lb *20480 *20480 *16890 14510 15300 10160 (24.6)
3.0 m kg *8710 6260 6810 4490 6320 4170 7.86
(9.8 ft) lb *19200 13800 15010 9900 13930 9190 (25.8)
1.5 m kg 9330 5970 6670 4360 6140 4030 7.93
(4.9 ft) lb 20570 13160 14700 9610 13540 8880 (26.0)
0.0 m
kg *14080 8760 9150 5810 6590 4290 6340 4140 7.70
(0.0 ft)
lb *31040 19310 20170 12810 14530 9460 13980 9130 (25.3)
-1.5 m kg *13680 8790 9120 5780 7070 4590 7.16
(-4.9 ft) lb *30160 19380 20110 12740 15590 10120 (23.5)
-3.0 m kg *16680 *16680 *12330 8960 *9030 5940 *8540 5700 6.20
(-9.8 ft) lb *36770 *36770 *27180 19750 *19910 13100 *18830 12570 (20.4)
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
※
Lifting capacities are based upon a standard machine conditions. Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools ground conditions and attachments.
Lifting capacities will vary with different work tools ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult your Hyundai dealer regarding the lifting capacities for specific work tools and
Consult your Hyundai dealer regarding the lifting capacities for specific work tools and
attachments.
attachments.
Failure to comply to the rated load can cause possible personal injury or property damage.
Failure to comply to the rated load can cause possible personal injury or property damage.
Make adjustments to the rated load as necessory for non-standard configurations.
Make adjustments to the rated load as necessory for non-standard configurations.
Model Type Boom Arm Counterweight Shoe Wheel Dozer Outrigger
HX260A L
MONO
BOOM
Length [mm] Length [mm] weight [kg] width [mm] width [mm] Front Rear Front Rear
5850 2100 4600 600 - - - - -
A
B
·
: Rating over-front : Rating over-side or 360 degree
·