Hyundai HUM 770, Инструкция по эксплуатации

Страница: 26 / 40

ENG - 26
CONTROL
Operation steps:
1) Take the water tank (4) out of the base (14), revolve the Valve-cup by the directions of
LOOSEN and FASTEN (8), and fill the water tank (4) with clear water. Close the Valve-cup
(8), and put the water tank (4) onto the base (14) carefully.
2) Put the Nozzle (1) into the socket on top of the water tank (4).
3) Connect the main supply (17), switch on the unit (15) (NEVER RUN THE UNIT WHEN
THERE IS NO WATER IN WATER BASIN), the LED display will on for 2 seconds then be
off. The unit stands by.
4) ON/OFF: It takes charge the electric supply of the whole unit. When press ON, the display
is on, the machine operates with the lowest mist output, at the same time the fan motor
works. When it is OFF, all the functions are invalid, and the display is off.
5) PRESET: When the unit stands by, press this button. The preset time can be chosen from 1
hour to 24 hours. The preset time will be counted down to work with the highest mist output.
At the same time, Ionizer works, the humidity level is 99RH%.
6) MIST: 4 levels from Low, Middle, Senior to High for different mist output. And the
corresponding power is from 17-19W (L), 19-23W (M), 23-27W (S) to 27-30W (H).
7) TIMER: Settings from 1- 24 hours. Timer can turn off the appliance when set time expires.
0:00 means cancelling the settings. 3 seconds after your settings, the timer function will
be counted down to work by minutes and will display with current humidity by turns for 5
seconds if having set the humidity level.
8) HUMIDISTAT: Function for automatic humidity control by setting value. You cen set from
40 -95RH% by 5RH%. When symbol „Humistat“ turn out means cancelling this settings.
3 seconds after your settings, the humidistat works. It stops when the current humidity is
more than the setting level, but the fan motor will keep working for 5 minutes. And continue
operate when the current humidity is 2RH% less than the setting level.
9) ANION: When the machine stands ON, press the ANION button, it works whatever it is
humidifying. The fan motor works at the same time. If it is not humidifying, when the ANION
is off, the fan motor stops. But if it is humidifying, when the ANION is off, the fan motor still
works.
10) Protection when waterless: When the tank is out of water, the Waterless lamp is on. And the
machine stops. Then the settings of TIMER and HUMIDISTAT will be cancelled. When filling
the water, it should be reset for the functions.
TROUBLE SHOOTING GUIDE
In case your humidifier does not work properly, please examine your machine before asking for
maintenance service.