4.5 JAMMING AND BREAKDOWNS
- When the drill gets stuck, release the accelerator to slow down the machine. you have to release the
accelerator and turn it back to idle to loosen it.
- In case of failure, stop the machine completely. Check the machine and have it inspected and
repaired by a qualified service technician.
5. MAINTENANCE AND STORAGE
5.1 MAINTENANCE
Service your tool regularly. This shall keep your tool in good working condition and extend its service life.
Do not use abrasive and corrosive agents to clean the tool. These types of products damage your
tool.
Do not repair it yourself. Repairs and inspections should be performed by a qualified person or an
authorized service centre (please contact your dealer).
After each use
Check the rod and tool body (cleanliness, wear, damage, etc.). If you notice damage, wear or malfunction,
do not use the tool and submit it to a qualified service for inspection and repair.
Maintenance schedule
The maintenance work described below may be performed by the operator. You can also request a
qualified technician to perform this maintenance work.
5.2 STORAGE
-
Cleaning the machine
- Store the machine in a dry and safe place. It should be out of the reach of children. Place the machine in
its packaging to avoid contact with the drill rod.
- When storing for long periods of time, empty the fuel tank completely.
After
each use
1
st
month or
20 hours
Everyseason
or 50 hours
6 months or
100 hours
12 months or
300 hours
Engine oil
Checking the
oil level
√
Change
√
√
Air filter
Checking
√
Cleaning-
change
√
Spark plug
Cleaning or
readjusting
√
Change
√
11
Содержание HTT50-A
Страница 1: ...WARNING Read thoroughly the instruction manual before use PETROL EARTH AUGER HTT50 A1 ...
Страница 16: ......
