Hyundai HTRT65-2C, Оригинальное руководство пользователя

Страница: 10 / 25

10
ASSEMBLY
Before you start up your chainsaw for the first time you must assemble the bar and chain, adjust the chain,
fill the fuel tank with fuel and add oil to lubricate the chain.
WARNING! Do not START the chain saw until it is completely set up for use.
Read this manual carefully before using the machine. Pay particular attention to safety precautions. This
manual is a reference and instruction manual and provides general information on the assembly, operation
and maintenance of the chainsaw.
SPIKED BUMPER
1. Remove the protective cover.
2. Place the spiked bumper on its location.
3. Secure the spiked bumper with the two bolts provided.
DRIVE BAR AND SAW CHAIN ASSEMBLE
WARNING!
Always wear protective gloves when working with the chain.
1. Make sure that the device is turned off. Place the saw on a flat surface.
2. Move the chain brake shield to the operating position by pulling the lever toward you. Make sure the
chain rotates around the bar (fig. 3).
3. Unscrew the two nuts (A) securing the protective cover. Remove the protective cover (B) (fig. 4).
Fig. 3 Fig.4
4. Install the bar so that the bar slot aligns with both bolts (C) (fig. 5).
5. Spread the chain in a circle with the cutting edges (D) aligned with the markings on the guide bar (fig. 6).