Hyundai HSEC40V-4A, Оригинальное руководство пользователя

Страница: 9 / 14

Assembly and operation
DESCRIPTION
1.
Trigger
2. Turbo button
3. Lock button
4.
Housing
5. Tube latch
6. Blower tube
7.
Battery pack
ASSEMBLING THE BLOWER TUBE
See Figure 2.
■
Slide blower tube over the blower housing outlet until
the tube latch locks into place through the opening in the
blower tube.
OPERATION
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of the
information on the blower and in this
operator’s manual as well
as a knowledge of the project you are attempting. Before use
of this product, familiarize yourself with all operating features
and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
ASSEMBLY
INSTALLING BATTERY PACK
See Figure 3.
■
Place the battery pack in the
blower’s battery port. Align the
raised rib on the battery pack with the groove in the
blower’s
battery port.
■
Make sure the latch on bottom of the battery pack
snaps in place and that battery pack is secured in the
blower before beginning operation.
REMOVING BATTERY PACK
See Figure 3.
■
Release the trigger to stop the blower.
■
Press and hold the latch button at the bottom of the
battery pack.
■
Remove battery pack from the blower.
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the blower when
assembling parts.
When placing battery pack in the blower, be sure the raised
ribs on the battery pack align with the grooves in the top of the
blower. Make sure the battery is fully seated, and it latches
into place properly. Improper installation of the battery pack
can cause damage to internal components.
WARNING
WARNING
CAUTION
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is su
ffi cient
to in fl ict serious injury.