Hyundai HSEC40V-4A, Оригинальное руководство пользователя

Страница: 10 / 14

O
peration
STARTING /STOPPING THE BLOWER
See Figure 4 and Figure 5
■
To start the blower, Press the lock button
and push the trigger
■
To stop the blower, release the trigger.
OPERATING THE BLOWER
See Figure 6.
■
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the
center of a pile.
■
To reduce sound levels, limit the number of pieces of
equipment used at any time.
■
Use rakes and brooms to loosen debris before blowing. In
dusty conditions, slightly dampen surfaces when water is
available.
■
Conserve water by using power blowers instead of
hoses for many lawn and garden applications, including
areas such as gutters, screens, patios, grills, porches,
and gardens.
■
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
■
After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
See Figure 6.
■
Pressing the turbo button, the blower can at Max. speed
immediately. unpressing the turbo,the speed normal
STORING THE BLOWER
Clean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible to
children. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
■
Store and charge your batteries in a cool area.
Temperatures above or below normal room temperature will
shorten battery pack life.
■
Never store batteries in a discharged condition. Wait for
battery pack to cool and fully charge immediately.
■
All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your unit for long periods of time without using it,
recharge the batteries every month or two. This practice will
prolong battery pack life.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing of
as waste. The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
WARNING
Battery tools are always in operating condition. Therefore,
operation trigger switch should always be in the OFF (released)
position when not in use or carrying/ moving the tool.
WARNING
To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any
maintenance.
WARNING
WARNING
WARNING
When servicing use only original manufacturer’s replacement
parts, accessories and attachments. Use of any other parts may
create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or
modi
fi cation is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
Do not at any time let brake fl uids, gasoline, petroleum based
products, penetrating oils, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken or
destroy plastic.