Hyundai HL930A, Руководство по эксплуатации и техническому обслуживанию

Страница: 126 / 262

(2) Fore/after adjustment
a
The fore/after adjustment is released by lift-
ing the locking lever.
Do not operate the locking lever
while operating.
After the adjustment, the locking lev-
er must latch into the desired posi-
tion with an audible click. It should
not be possible to move the opera-
tor's seat into another position when
it is locked.
Do not lift the locking lever with your
leg or calf.
(3) Seat depth adjustment
a
The depth of the seat pan can be individual-
ly adjusted.
b
To adjust the depth of the seat cushion, pull
the right handle upwards. By moving the
seat pan backwards or forwards the desired
seating position can be reached.
(4) Seat pan angle adjustment
a
The angle of the seat pan can be individually
adjusted.
b
To adjust the angle of the seat pan, pull the
left handle upwards. By exerting pressure on
or off the front or rear part of the seat pan it
can be moved to the desired angle position.
(5) Armrest (LH)
a
The armrests can be folded up if required and the
height can be individually adjusted.
b
To adjust the armrest for height, separate the round
cap (see arrow) from the cover and loosen the hexa-
gon nut (size 13 mm) behind it adjust the armrests to
the desired position (5 steps) and tighten the nut
again (25 Nm).
Replace the cap onto the nut.
Armrest (LH, RH)
a
Tilt lever
3-68