19
4.0 - OPERATION
4.1 - Connecting the Water Source
1. Water supply should be from a regular tap or clean water tank - do not
use hot water. When using a regular garden hose, allow water to flow for
approximately 30 seconds to clear out debris and air pockets.
2. Turn off water source prior to uncoiling the hose and removing knots
3. Connect hose to intake port and tighten by hand
4. Connect the high pressure hose to the pump (ensure that hose is secure
prior to starting engine or pump)
4.2 - Starting the Pressure Washer
RECOIL START METHOD
1. Rotate the fuel valve lever to ON position.
2. If the engine is cold: Push the choke lever to the CLOSE position out to
close the choke.
3. Grasp the recoil starter handle and pull it until the engine starts.
Содержание HCP3000
