injury to the user, damage to the machine and void this warranty.
When refuelling, be sure to stop the engine and confirm that it is cooled down. Never refuel
when the engine is running or hot. When gasoline spills, be sure to wipe it up completely
dispose of those materials before starting the engine.
Stay clear of other workers or bystanders by at least 15 meters.
Whenever approaching an operator of the machine, carefully call his attention and confirm
that the operator stop the engine. Be careful not to startle or distract the operator which can
cause an unsafe situation.
Never touch the nylon cutting head or blade whenever the engine is running. If it is
necessary to replace the protector or cutting attachment, be sure to stop the engine and
confirm that the cutting device has stopped running.
The engine should be turned off when the machine is moved between work areas.
Be careful not to hit the nylon cutting head against stones, or the ground.
Unreasonable rough operation will shorten the life of the machine as well as create an
unsafe environment for yourself and those around you.
Pay attention to loosening and overheating of parts. If there is any abnormality of the
machine, stop operation immediately and check the machine carefully. If necessary, have
the machine serviced by an authorized dealer. Never continue to operate a machine which
may be malfunctioning.
In start-up or during operation of the engine, never touch hot parts such as the muffler, the
high voltage wire or the spark plug.
After the engine has stopped, the muffler is still hot. Never place the machine in any places
where there are flammable materials (dry grass, etc.), combustible gasses or combustible
liquids.
Pay special attention to operation in the rain or just after the rain as the ground may be
slippery.
If you slip or fall to the ground or into a hole, release the throttle lever immediately.
Be careful not to drop the machine or hit it against obstacles.
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach
the spark plug.
When the machine is placed in storage for a long time, drain fuel from the fuel tank and
carburettor, clean the parts, move the machine to a safe place and confirm that the engine
is cooled down.
Make periodic inspections to assure safe and efficient operation. For a thorough inspection
of your machine, please contact a dealer.
Keep the machine away from fire or sparks.
It is believed that a condition called Raynaud’s phenomenon, which affects the fingers of
certain individuals, may be brought about by exposure to vibration and cold. Loss of colour
and numbness in the fingers. The following precautions are strongly recommended
because the minimum exposure which might trigger the ailment is unknown.
Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.
Maintain good blood circulation by performing vigorous arm exercises during frequent work
breaks and also by not smoking.
Limit the hours of operation. Try to fill each day with jobs where operating the brush cutter
or other hand-held power equipment is not required.
If you experience discomfort, redness and swelling of the fingers followed by whitening and
