TROUBLES SHOOTING
•
If correct measurement is impossible even after checking the above-mentioned points, consult at the store
where you have purchased the unit or the nearest Hyundai dealer without touching the internal mechanism.
• In some very rare cases, there may be error due to the physical condition of the person. In such cases, please
consult your doctor.
1. You might wear thick jacket and your BPM fails to
detect pressure values. Please take off your jacket and
measure again.
2. You might use it incorrectly, such as measure
pressure value on child.
Incorrect measured result
“Err 3” is shown on LCD
panel
1. Keep still after you push the Start button.
2. Please remove interfering sources such as magnetic
material or cell phone.
1.Movements occur on the arm
2.Other interference
signal around BPM
“Err 2” is shown on LCD
panel
Please contact authorized Hyundai dealer.
Deflate too fast
“Err 1” is shown on LCD
panel
1. Please check if the air adaptor on Main Unit and Cuff
are loosen, and connect them.
2. Please check air tube if it is broken and change it.
3. Please check arm cuff If it is broken and change it.
Fail to inflate
“Err P” is shown on LCD
panel
Insert batteries in the correct direction
Are the polarities of batteries in
the wrong position?
Replace the batteries with new ones.
Are the batteries exhausted?
Nothing is displayed when
you push the Start button.
Solution
Problem
Symptom
-14-