Hyundai H-VCRX50, Инструкция по эксплуатации

Страница: 8 / 24

8.

Start/Pause – Push the button in the middle to start the device or to pause
the device during the vacuuming process.

Directional buttons – You can use the directional buttons to steer the device
manually.

Automatic charging – Push this button to tell the device to return to the
charging station to recharge.

Timer – Push this button to set the time for the device to vacuum each day
(24-hour mode).
Functions

The device has three different vacuuming modes. You can use the menu button on
the device or the corresponding buttons on the remote control to select these
modes.

The robotic vacuum cleaner has the following vacuuming modes:

Random cleaning mode : The robotic vacuum cleaner will travel straight ahead
until it encounters an obstacle, it will then veer off and travel straight ahead in
another direction.

Spiral cleaning mode : The robotic vacuum cleaner will begin by travelling
from the inside to the outside in an increasingly large spiral. It will then travel from
the outside inward in an increasingly small spiral. Once it has reached its starting
position, it will look for a new area and begin the process again.

Edge cleaning mode : The robotic vacuum cleaner will move forward until it
encounters an edge (e.g. wall, piece of furniture), it will then travel along this edge
until it reaches the next edge.
Timer function

If you do not deactivate the timer and the device is charged, it will always start
cleaning at the set time.

The device will vacuum in random mode with the timer function.

You can program the robotic vacuum cleaner so that it starts vacuuming at a
desired time.

With the start/pause switch on the device, switch the device to standby mode.

Push the button on the remote control to set the time at which you wish the

device to vacuum each day.

A signal tone will sound, the start/pause switch will illuminate in red and the

device will start vacuuming.

If you now switch the device to standby outside of the timer setting, the start/pause
switch will illuminate in red.

To deactivate the timer, switch the device to standby mode and push the button on
the remote control again. The timer has now been deactivated and the start/ pause
switch will illuminate in blue.