Instruction manual
6
flash (compatible with USB version 2.0)
up to 16 Gb.
• This unit is also equipped with
a SD card socket that can accept
and play MP3/WMA files stored on
standard SD cards up to 16 Gb.
Always switch off the unit or
change mode to another one before
removing a USB flash drive or SD card,
to prevent damage to your USB device
or memory card.
Note: Although this product is fully
compatible with USB 2.0 and SD card
standard formats, a small percentage
of USB flash drives and SD cards
might not be readable, due to those
device manufacturers’ non-compliance
with the full (official) USB and SD card
standards.
• FAT32 file system is supported by
USB and SD of this unit.
According to the USB 1.1/2.0
Standard, usage of a USB device with
power current consumption exceeding
500 mA is not recommended without
supplementary power supply. Failure
to use supplementary power for
connected USB drives with power
consumption exceeding this value
as well as defective USB drives may
cause mechanical or thermal changes
of elements of this unit as well as
failure of internal elements of the USB
port. Such damages are not warrantee
cases.
Warning: usage of external USB
drives containing BIN files in the root
directory may cause malfunction of the
unit or damage to the software.
Alarm operation
Alarm mode
• Press button on the unit or M
button on the RC and choose SYSTEM
SETTINGS. In TOOL submenu choose
ALARM and switch it to ON.
• Set the alarm time in the same
manner as the clock.
• Choose CYCLE option to set the
interval.(every day/one time/cycle). If
you choose CYCLE, mark those days
to which you want to apply the alarm.
Maintenance and care
If necessary, clean the unit with a
piece of cloth dampened with water
only (be sure the power cord is
disconnected). The unit shall not be
exposed to dripping or splashing and
no objects filled with liquids, should be
placed on the unit. Normal ventilation
of the unit shall not be impeded for
intended use.
Содержание H-PS1204
Страница 15: ......