Hyundai H-DH16-P82WF, Инструкция по эксплуатации

Страница: 25 / 36

IM2021
25
8. OPERATION
Control panel
In the standby state, press the power button to turn on, the machine will enter automatic
dehumidification mode by default, the automatic dehumidification mode light will be on and the
default fan speed is high. The LED show ambient humidity.
In the power-on state, press the power button to turn off, the running indicator light goes off and
the compressor stops immediately, and then the fan shut down after 30 seconds delay.
The mode key only can be operated when the sleep mode is off.
Auto mode - continuously drying mode cycle, press once to switch the mode from one to
another, the corresponding indicator lights up.
● Auto mode: when environmental humidity ≥ set humidity +3%, the fan starts working and
compressor starts working after 3 seconds. When environmental humidity ≤ set humidity -3%,
the compressor stops working and fan stops working after 30 seconds’ delay.
Both fan speed and humidity can be adjusted under auto mode.
● Continuously drying mode: The machine continues to run, not affected by humidity and the fan
runs in high speed.
Both fan speed and humidity can’t be adjusted under continuously drying mode
Touch the humidity button to check the current environment humidity, touch this button again
and you can set the humidity. The range of target humidity is 30% to 35% - 40% - 45% - 50% -
55% - 60% - 65% - 70% - 75% - 80% - 30%... After the humidity setting is completed, the system
confirm the set humidity after the screen flashes for 3 seconds and restore to display the
ambient humidity.
After the set humidity is completed, the compressor will decide whether to open or not according
to the difference between the current ambient humidity and the set humidity.