20
21
General information
General information
Handling compact discs
Handling compact discs
• Do not insert anything other than a CD into
the CD loading slot.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
skipping or noise damage the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight,
high humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature (such as leaving the discs in your
car during summertime) can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of the
discs.
• Use 12-cm CDs. Use only conventional,
fully circular discs. Do not use shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight
motion from the center to the edge.
Never use thinner benzine, record cleaner
or anti static spray on a compact disc. Such
chemicals can damage its plastic surface.
Cleaning the unit body
Wipe with a soft cloth. If the cabinet is very
dampen (not dropping wet) the cloth with a
weak solution of soapy water, and then wipe
clean.
Accessories
1. Receiver
1 pc
2. Front panel
1 pc
3. Protective bag
1 pc
4. Remote controller
1 pc
5. ISO connector
1 pc
6. Audio-video cable
1 pc
7. Mounting parts:
Mounting sleeve
1 pc
Outer trim ring
1 pc
Steel bar
1 pc
Screw M5
4 pcs
Nut M5
1 pc
Flat washer
1 pc
Spring washer
1 pc
Rear mounting bolt
1 pc
Release keys
2 pcs
8. Consumer information
1 pc
9. Warranty card
1 pc
10. Instruction manual
1 pc
