Hyundai H-CMD7073, Инструкция по эксплуатации

Страница: 16 / 64

16
Auto memory store: press APS button on the panel for more than 2 seconds to enter auto store mode. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press
this button again.
Stereo/Mono mode
Press the ST/PROG button on the RC to select Stereo or Mono.
OR press the SEL button until ST is selected, rotate VOL knob to select Stereo or Mono.
Local/Distance control
Press the LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
Or press the SEL button until LOC is selected, rotate the VOL knob to select LOC ON or LOC OFF mode. Local and
distance reception setting can facilitate the radio reception, depending on the location in which the radio is being used.
AF (Alternative Frequencies) function
Press the AF button on the panel to select AF ON or AF OFF.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station
with the same PI (Program Identification) as the current station but with stronger signal strength.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode. Default setting is ON.
TA (Traffic Alarm) function
Press the TA button on the panel to select TA ON or TA OFF.
In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is
received the unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the
announcement. After the traffic announcement is over, it will return to the previous mode and volume level.
PTY (Program Type)
1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is shown.
www.DataSheet4U.com