5
Instruction manual
standard USB flash (compatible with USB
version 2.0) up to 32 GB.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD/MMC cards
up to 32GB, as well as microSD/TF card
socket for cards up to 32GB.
Always switch off the unit or change
mode to another one before removing a USB
flash drive or SD/microSD card, to prevent
damage to your USB device or memory card.
Note:
Although this product is fully
compatible with USB 2.0 and SD/MMC card
standard formats, a small percentage of USB
flash drives and SD/MMC cards might not be
readable, due to those device manufacturers’
non-compliance with the full (official) USB and
SD/MMC card standards.
• FAT32 file system is supported by USB
and SD/MMC of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
Alarm operation
Alarm mode
• In clock mode, press and hold MODE
button enter the alarm setting mode. You
can set up to 4 alarms. Turn the TIME
ADJUSTMENT knob to select the one you
want to set. The chosen alarm will flash.
• In alarm setting mode press
or
buttons to set the alarm time. Press once to set
hours, twice to set minutes. Rotate the TIME
ADJUSTMENT knob to adjust time. When
the desired time for alarm is set, press to
confirm it. The alarm indicator will then appear
on the screen.
• To cancel the alarm, press and hold the
MODE button, rotate the TIME ADJUSTMENT
regulator to choose the one you wish to cancel,
then press the button. Press and hold to
cancel all the alarms at once.
• If no button is pressed within 5 seconds in
alarm mode, the unit will exit to clock mode.
Alarm ringing
• When the alarm goes off, the icon on the
LCD will flash. If uninterrupted, the ringing will
last for 1 minute, then the snooze mode is
activated. During snooze, the ringing repeats
every 5 minutes and continues for 1 minute.
After the 3rd time the icon will stop flashing.
Press any button except STANDBY and TIME
ADJUSTMENT to stop the alarm.
• Press the EQ button on the remote control
to switch between equalizer modes: Natural,
rock, pop, classic, soft, jazz, bass, blues, hall.
• Press the REPEAT button on the RC
repeat all tracks, one track, or a random track.
• Press the LIGHT button to adjust the
brightness of the LCD, for up to 6 levels:
OFF/20%/40%/60%/80%/100%.
Remote control operation
