4
Instruction manual
projected image focus.
Maintenance and care
Switch off the appliance, unplug from
the power supply. The outside of the
appliance can be cleaned with a slightly
damp cloth.
Accessories
Receiver
1 pc
Instruction manual
1 pc
Warranty card
1 pc
Consumer information
1 pc
Alarm operation
Setting the alarm
• Press and hold ALARM button.
• Without releasing ALARM button,
press HOUR button or MIN button to set
the desired wake up time.
• Release ALARM button to show the
current time.
• Slide ON/OFF/AUTO/BUZZ to AUTO
position. The radio will play automatically
at the present time.
Alarm sound setting
Follow the steps of “Setting the alarm”
and slide ON/OFF/AUTO/BUZZ switch to
BUZZ position. You will be awakened by
the buzzer alarm.
Snooze control
• When the alarm is on, press
SNOOZE button once, after
approximately 9 minutes the alarm will be
on again.
• If you want to stop the alarm, switch
ON/OFF/AUTO/BUZZ to OFF position or
press AL.OFF button.
Laser projection
• The unit is equipped with a laser
projection with individual time setting.
• Slide PROJECTION switch to ON
position.
• Press TIME button on the back of the
projector and without releasing it, press
repeatedly HOUR button and MIN button
on the back of the projector to set the
correct time.
• Rotate the projector to direct the laser
beam on a plain surface (ceiling, wall).
• Using FOCUS regulator, adjust the
