Hyundai H-1438, Инструкция по эксплуатации

Страница: 6 / 15

6
Instruction manual
Cassette playback
• Slide FUNCTION switch to TAPE
(OFF) position.
• Press button to open the
cassette compartment.
• Insert a cassette and push the
cassette door to close the cassette
compartment. The full tape reel should be
on the right side.
• Press button to start playback.
• Press button to pause playback.
If you press it again the playback will
continue.
• Press button to stop playback,
press the button again to open the cassette
door so you can take out the tape.
• When the tape plays to the end,
playback will stop automatically.
• Fast forward and rewind: You
can run forward and rewind the tape.
Stop playback. Use
button for fast
backward and button for fast forward
playback. When you have reached the
desired tape point, press
button to
stop the process.
Never use fast forward or rewind
operations during playback. This may
cause damage to the tape.
Cassette recording
Insert a blank cassette with the tape-side
up. Close the cassette compartment. The
unit is now ready to start recording, which
can be done from either the radio or CD.
Recording from radio
• Set FUNCTION switch to RADIO
position.
• Tune to the desired station by rotating
TUNING knob.
• Press button and button
simultaneously to start recording.
Recording from CD/USB/SD
• Set FUNCTION switch to CD (MP3)/
USB/SD position.
• Press and buttons at the same
time to start recording, then press
button.
• Start the CD and select a song to be
recorded.
• Release button to start recording.
Dynamic Bass Boost System
For increased bass at all volume levels,
set DBBS switch into “On” position for an
emphasized bass sound.
AUX line in jack
You can connect the audio output of
an external device (such as a CD-player)
to this unit, to listen to the sound of that
device through the amplifier of this unit.
• To connect an external audio device
(eg. MP3 player), please use a standard
stereo cable (not included) with 3.5 mm to
3.5 mm plugs to connect the headphone
out or audio line-out of the external device
to the AUX input socket of this unit.
• Slide the function switch to RADIO/
AUX-IN position.
• Turn on the external device.