7-72
Maintenance
Daytime running lamp (DRL)/
Position lamp (Bulb type)
1. Open the hood.
2. Disconnect the negative battery
cable.
3.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4.Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5.Insert a new bulb by inserting it into
the socket and rotating it until it
locks into place.
6.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
7.Push the socket into the assembly
and turn the socket clockwise.
Daytime running light (DRL)/
Position lamp (LED type)
If the lamp (LED) does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the LED lamp, for it may dam-
age related parts of the vehicle.
Turn signal lamp
If the lamp does not operate, we rec-
ommend that the system be checked
by an authorized HYUNDAI dealer.
OAD078134N
OAD078033N
Содержание ELANTRA 2019
Страница 10: ......
Страница 276: ...4 43 Multimedia System 4 NCC for Taiwan ...
Страница 447: ...6 21 What to do in an emergency 6 JACKDOC14S EC Declaration of conformity for Jack ...
Страница 557: ...I Index I ...