manualshive.com logo in svg

Hyundai Elantra 2017, Руководство пользователя

Поделиться
Скачать
Hyundai Elantra 2017 Скачать руководство пользователя страница 147

3-53

Con

v

enient f

eatur

es of y

our v

ehicle

3

- Use the trunk release lever.

3. Lift the trunk lid up.

Closing the trunk

Lower the trunk lid and press down
until it locks.

To prevent damage to the trunk lid
torsion bar and the attached hard-
ware, always close the trunk
before driving.

Information 

In cold and wet climates, trunk lock
and trunk mechanisms may not work
properly due to freezing conditions.

i

NOTICE

Make sure there are no people
or objects around the trunk
before opening or closing the
Power Trunk. Wait until the trunk
is open fully and stopped
before loading or unloading
cargo from the vehicle.

WARNING  

Always keep the trunk lid com-
pletely closed while the vehicle is
in motion. If it is left open or ajar,
poisonous exhaust gases con-
taining carbon monoxide (CO)
may enter the vehicle and seri-
ous illness or death may result.

WARNING  

OAD045028

■

Inside

Содержание Elantra 2017











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды