Hyundai DV2H378DU, Руководство пользователя

Страница: 66 / 80

EN - 66
2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR
speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO: The player outputs the average signal of the left-channel and right-channel audio
via the FL speaker and the FR speaker
NOTE: This function only applies to the Dolby AC -3 encoded 2-channel discs.
2.3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can
adjust the dynamic value up to avoid losing sound details resulting from the low volume.
2.4 ChANNEL DELAY
This item is used to set the delay time for the center, rear speakers and the subwoofer. The
delay is to compensate for the audio propagation time difference caused by the distance diffe -
rence of the speakers to the listener.
Use the direction key [↑]/[↓] to select a speaker, center speaker, subwoofer, left surround spea -
ker or right surround speaker. Then use the direction key [←]/[→] to set the distance difference.
NOTE:
The unit does not support delays for when the distance between the center or surround spea -
kers and the listener are longer than that between the front speakers and the listener.
In case the channel delay settings cannot match your speaker configuration, please set all
distance difference to 0cm.
2.5 EQUALIzER
2.5.1 SOUND MODE
You can select a sound mode in this item.
2.5.2 BASS BOOST
Set it to ON to boost the bass sound.
2.5.3 SUPER BASS
Set it to ON to get the super bass sound effect.
2.5.4 TREBLE BOOST
Set it to ON to boost the treble sound.
2.6 3D PROCESSING
3D processing provides a virtual surround sound experience using just two speakers.