Hyundai DS-8000 HFI-ST Series Скачать руководство пользователя страница 165

Страница: 165 / 240

User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR

164

Notes:

This chapter is available for DS-9100/9000HFI-RT series only. For the configuration for alarm response

actions of array exception, please refer to

Chapter 8.5

and

Chapter 8.6

10.1

Configuring Array and Virtual Disk

Purpose:

RAID (redundant array of independent disks) is a storage technology that combines multiple disk drive

components into a logical unit. A RAID setup stores data over multiple hard disk drives to provide enough

redundancy so that data can be recovered if one disk fails. Data is distributed across the drives in one of several

ways called "RAID levels", depending on what level of redundancy and performance is required. The

DS-9000/9100HFI-RT is capable of realizing RAID settings, supporting RAID 0, RAID 1, RAID 5 and RAID 10.

Before you start:

Please install the HDD(s) properly and it is recommended to use the same enterprise-level HDDs (including model

and capacity) for array creation and configuration so as to maintain reliable and stable running of the disks.

Introduction:

The DS-9000/9100HFI-RT series can store the data (such as record, picture, log information) in the HDD only

after you have created the virtual disk or you have configured network HDD (refer to

Chapter 11.2

Managing

Network HDD

). Our device provides two ways for creating the virtual disk, including one-touch configuration and

manual configuration. The following flow chart shows the process of creating virtual disk.

Figure 10. 1

RAID Working Flow

Содержание DS-8000 HFI-ST Series

















































































































































































































































Результаты поиска

Содержание DS-8000 HFI-ST Series

Отзывы:

Бренды по названию

Популярные бренды

Hyundai DS-8000 HFI-ST Series, Руководство пользователя

Результаты поиска

Содержание DS-8000 HFI-ST Series

Отзывы:

Бренды по названию

Популярные бренды