Hyundai DS-8000 HFI-ST Series Скачать руководство пользователя страница 149

Страница: 149 / 240

User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR

148

Figure 9. 15

Configure FTP Settings

FTP Protocol:

Select the protocol for the FTP server. FTP and SFTP (Secure File Transfer Protocol)

are available. For SFTP, the remote FTP server should support the SFTP protocol. It is a more secure

way for file transmission by adopting the secure encryption method. However, due to the secure

encryption method, the speed of the file transmission with SFTP protocol is much lower than that with

FTP protocol.

Directory:

In the

Directory

field, you can select the Root directory, Parent directory and secondary

directory. When the Parent Directory is selected, you have the option to use the Device Name, Device

No. or Device IP for the name of the directory, or you can customize the directory name; and the when

the Secondary Directory is selected, you can use the Camera Name or Camera No. as the name of the

directory, or you can customize the directory name.

Note:

If you want to modify the Device Name, Device No., Device IP or Camera Name, please enter

the corresponding interface to modify.

Click

to save and exit the interface.

Note:

Please make sure the remote FTP server has been started up before setting the FTP parameters.

9.2.5

Configuring SNMP Settings

Purpose:

You can use SNMP protocol to get device status and parameters related information.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

SNMP

tab to enter the SNMP Settings interface.

Figure 9. 16

SNMP Settings Interface

Check

checkbox to enable SNMP.

Configure the SNMP settings.

Содержание DS-8000 HFI-ST Series

















































































































































































































































Результаты поиска

Содержание DS-8000 HFI-ST Series

Отзывы:

Бренды по названию

Популярные бренды

Hyundai DS-8000 HFI-ST Series, Руководство пользователя

Результаты поиска

Содержание DS-8000 HFI-ST Series

Отзывы:

Бренды по названию

Популярные бренды