Changzhou ITC Power Equipment Manufacturing Co.,Ltd.
Changzhou ITC Power Equipment Manufacturing Co.,Ltd.
Changzhou ITC Power Equipment Manufacturing Co.,Ltd.
Changzhou ITC Power Equipment Manufacturing Co.,Ltd.
Changzhou ITC Power Equipment Manufacturing Co.,Ltd.
POWER PRODUCTS
25
3.3 Recoil starter assembly
3.3.1 Disassembly
(1) Remove the recoil starter assembly from the engine. Note the direction of
rotation.
(2) Pull the rope out about 12 inches or 30 cm. When the gap of starter reel attaches
the end of the starter rope, stop the reel with your finger and pull the rope out with an
awl as show below in figure (a). Put your finger on the gap to push the reel for
returning the rope until the reel stop moving.
(3) Disassemble all parts as shown in figures (b)-(d).
(4) Remove the starter reel from the case as shown in figure (e) then remove the
spring.
3.3.2 Reassembly
(1) Check whether the spring is in proper position inside the case. Adjust the shape
of inner end of the spring to engage it with the reel’s hook mark correctly at the
position 1 ½ inches or 4mm away from the starter reel shaft. (The 10mm inner
end of the spring can be simply reshaped with pliers.)
