Hyundai CRMD 7222 SU, Инструкция по эксплуатации

Страница: 110 / 144

ENG - 110
Playing Source Selection
Method 1
Short press the SRC button on the panel or remote control to cycle through all the available
sources.
Method 2
In any mode, long press the SRC button on the panel or remote control to enter main source
menu, then use navigate button to select the desired mode, and press OK to confirm.
Note:
• When some devices are not ready, they cannot be selected.
• You should stop switching when the playing source you desired has been selected and wait
for some seconds, the unit will auto enter the playing source mode you have selected.
When Parking Brake Applied
1) If ‚PRK SW‘ cable is connected to hand brake switch, the video display of the TFT monitor
will be controlled by driving status, system setup and input video sources.
2) When the car is moving ahead, if the video disc is played, the screen appears “WARNING:
Engage Parking Brake to View Video”. The above warning screen will prevent the driver
watching images. The passengers at the rear seats can watch normally.
When Reverse Driving
If the rear view video camera is connected, the unit automatically switches to CAMERA
source during reverse driving. The unit returns to the original work mode after the reverse dri -
ving is done.
ROTARY KNOB MENU
1. Rotate the knob to adjust volume level.
2. Short press to access the Audio&VIDEO Setting menu.
Each press the knob to change the AUDIO mode: EQ/Bass/Treble/Balance/Fader,
and rotate the knob to adjust level. Each press the knob to change the VIDEO mode: Bright/