ENG
ENG - 11
RCC (RADIO-CONTROLLED CLOCK) FUNCTION
After powering on, if the switch is on "
TIME
", it is TIME SETTNG mode, it will not enter RCC
signal receiving.If the switch is not on "
TIME
"shift, it will enter RCC signal receiving.RCC signal
searching will start everyday automatically and it will last about 7 minutes. Automatically search
radio signal to adjust time at 1:00 am, 2:00 am, 3:00 am, 4:00 am and 5:00 am. If there is no
signal received or before 3:00 am, it will automatically start searching at 4:00 am and 5:00 am.
If signal received at 4:00 am, it will not search signal that day. No matter the signal received at
5:00 am or not, there will not search again that day. RCC time searching will last 7 minutes.
Under normal time displaying mode, keep pressing ‘
DOWN
’ button to enter into RCC signal
searching. Under the RCC signal searching mode, press “
DOWN
” button to quit RCC signal
searching.
RCC RECEIVING ICON
When the clock is searching signal, RCC icon will be flashing, if signal is detected,
will display and keep flashing. After signal successfully received, LCD will display and stop
flashing, and exist RCC searching. If no signal received that day, next searching time will be at
1:00 am next day. If alarm rings while searching RCC signal, the clock will continue searching
RCC signal after alarm stopped.
When receive DST, the DST symbol will display on the LCD screen , if no DST, It will display
only.
TIME and CALANDER SET
1)
When power on, the preset time will be displayed on AM 12:00.
The RCC function will automatically turn on and searching signal.
2)
Turn the “
LOCK
” key to “
TIME
” level, time display will be flashing.
3)
Press the “
MODE
” button to set the time and Calendar data, press
UP
or
DOWN
to adjust it.
4) Turn the “
LOCK
” key back to LOCK STATUS to confirm the data setting.
5) Press and hold “
DOWN
” key to turn on or turn off the RCC function by manually.
ALARM AND SNOOZE SET
ALARM SET
1)
When power on, the preset alarm time displayed is AM 6:00.
2)
Turn the “
LOCK
” key to the “
ALARM
” level, the alarm time will be flashing.
3)
Press the “
MODE
” button to set the alarm time, press
UP
or
DOWN
to adjust it.
4) Turn the “
LOCK
” key back to LOCK STATUS to confirm the data setting.
5) Turn to the “
MO-FR
” level to set working day alarm (alarm working from Mon. to Fri.).
Word “
MO-FR
”will display on sreen.
6)
Turn to the “
MO-SU
” level to set the daily alarm (alarm working from Mon. to Sun.).
Word “
MO-SU
” will display on sreen.
7) Turn the “
ALARM OFF
” level to turn off the alarm.
8) Alarm will last 1 minute if no other operations.
SNOOZE SET
1)
When alarm ringing, press “
LIGHT/SNOOZE
” to make it silent for 5 minutes, and the snooze
“Zz” flashing.
2)
During snooze time, press any other key(except “
LIGHT/SNOOZE
”) will stop snooze
function.
3)
The maximum of repeated snooze can be 10 times.
TEMPERATURE
1)
The indoor temperature will display automatically after set up.
2)
Press “
UP
” key to switch °C/°F.
3)
The temperature will be automatically updated in each 10 seconds.
4) Temperature tolerance: +/- 1.5 °C
