Hyundai 2010 GENESIS COUPE, Руководство пользователя

Страница: 85 / 103

9. Use suction cups (A) to hold the windshield over the opening, align it with the alignment marks (B) made in step 15,
and set it down on the adhesive. Lightly push on the windshield until its edges are fully seated on the adhesive all
the way around. Do not open or close the doors until the adhesive is dry.
10. Scrape or wipe the excess adhesive off with a putty knife or towel. To remove adhesive from a painted surface or
the windshield, wipe with a soft shop towel dampened with alcohol.
11. Let the adhesive dry for at least one hour, then spray water over the windshield and check for leaks. Make leaking
areas, and let the windshield dry, then seal with sealant:
A. Let the vehicle stand for at least four hours after windshield installation. If the vehicle has to be used within the
first four, it must be driven slowly.
B. Keep the windshield dry for the first hour after installation.
12. Reinstall all remaining removed parts. Install the rearview mirror after the adhesive has dried thoroughly. Advise
the customer not to do the following things for two the three days:
A. Slam the door with all the windows rolled up.
B. Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough,
uneven roads)
Body (Interior and Exterior) > Bumper > Front Bumper > Components and Components
Location