Hyundai 2010 GENESIS COUPE, Руководство пользователя

Страница: 40 / 103

7. Installation is the reverse of removal.
• Make sure of connectors is plugged in properly and each rod is connected securely.
• Make sure the door lock and opens properly.
Inside Handle Replacement
1. Remove the door trim.
2. Loosen the mounting screw, then remove the inside handle (A).
3. Installation is the reverse of removal.
Glass Replacement
1. Remove the front door trim.
2. Remove the glass mounting hole plug.
• Using the door switch to align the mounting hole with the hole on the door glass.
• If it is impossible, align the hole by hand after removing the motor.
• Be careful not to drop to glass and scratch the glass surface.
3. Carefully adjust the glass (B) until you can see the bolts, then loosen them. Separate the glass from the glass run
and carefully pull the glass out through the window slot.
Tightening torque :
8.8~11.8 N.m (0.9~1.2 kgf.m, 6.5~8.7 lb-ft)