2
DRIVING YOUR HYUNDAI
15
2
DRIVING YOUR HYUNDAI
15
C310D01JM-AAT
Indicators and Warning
The indicators should illuminate when
the ignition key is turned to ON or
START but should go out after three
seconds.
If the indicators do not illuminate, or the
ESP or ESP-OFF indicator does not go
out after 3 seconds, have the vehicle
checked by an authorized dealer.
Should there be any unusual conditions
in the device while driving, ESP-OFF
indicator illuminates as a warning.
If ESP-OFF indicator illuminates, pull
your car to a safe place and stop the
engine.
Then, start the engine again to check if
the ESP-OFF indicator goes out.
If the indicator remains lit even after the
engine has been started, have your car
checked by an authorized Hyundai
dealer.
Take your vehicle to an authorized
HYUNDAI dealer and have the system
checked.
NOTE:
o The VSM does not operate when:
- Driving on bank road such as
gradient or incline
- Driving rearward
- ESP-OFF indicator light remains
on the instrument cluster
- EPS indicator light remains on
the instrument cluster
o The VSM is designed to function
above approximately 15 km/h (9
mph) on curves.
o The VSM is designed to function
above approximately 30 km/h (18
mph) when a vehicle is braking on
a split-mu road. The split-mu road
is made of surfaces which have
different friction forces.
o Your vehicle is designed to acti-
vate according to the driver’s in-
tention, even with installed VSM.
Always follow all the normal pre-
cautions for driving - including
driving at safe speeds for the con-
ditions.
VEHICLE STABILITY MAN-
AGEMENT (VSM)
(If Installed)
This system provides further enhance-
ments to vehicle stability and steering
responses when a vehicle is driving on
a slippery road or a vehicle detected
changes in coefficient of friction be-
tween right wheels and left wheels when
braking.
VSM ON/OFF mode
When the VSM is operating, the ESP
indicator light on the instrument cluster
will blink and you can feel a slight
pulsation of the steering wheel.
If you want to cancel the VSM opera-
tion, press the ESP-OFF switch. If you
press the ESP-OFF switch, the VSM
and ESP function will be deactivated
and ESP OFF indicator light will come
on and stay on.
To turn the system back on, press the
ESP-OFF switch again. The ESP-OFF
indicator light will go out.
The VSM can be deactivated even if
you don’t cancel the VSM operation by
pressing the ESP-OFF switch. It indi-
cates that a malfunction has been de-
tected somewhere in the EPS (Elec-
tronic Power Steering) system or VSM
system.
Содержание 2010 Accent
