manualshive.com logo in svg

Hyundai 2003 Accent, Руководство пользователя, Страница: 61 / 186

Поделиться
Скачать
Hyundai 2003 Accent Скачать руководство пользователя страница 61

1- 48   

FEATURES OF YOUR HYUNDAI

o To open the glove box, pull on the glove box

release lever.

B500B01HP-AAT

MULTI BOX

The multi box may be opened by pulling it out
by its grip. It is used for storing small articles.

HLC2118

B510A01A-AAT

OUTSIDE REAR VIEW MIRROR
Manual Type (If Installed)

The outside rearview mirrors are equipped with
a remote control for your convenience. It is
operated by the control lever in the bottom front
corner of the window.
Before driving away, always check that your
mirrors are positioned so you can see behind
you, both to the left and right sides, as well as
directly behind your vehicle. When using the
mirror, always exercise caution when attempt-
ing to judge the distance of vehicles behind or
along side of you.

B540B01TB-AAT

SEAT POCKET (If Installed)

A seat side pocket is located on the front
passenger seat to hold papers.
There are seatback pockets on the backside
of the front seats.

HLC2119

HLC2113

Содержание 2003 Accent



























































































































































































Отзывы:

Нет отзывов