Hyundai 2003 Accent Скачать руководство пользователя страница 145

Страница: 145 / 186

DO-IT-YOURSELF MAINTENANCE

6- 9

6. To install the new spark plug, guide the

socket down over the spark plug, being care-
ful not to damage the ceramic insulator.

G070A02Y-AAT

CHANGING THE AIR CLEANER FILTER

The replacement of air cleaner filter is per-
formed in the following manner.

1. Unsnap the clips around the cover.
2. When this is done, the cover can be lifted off,

the old filter removed and the new filter put in
its place.

Genuine Hyundai replacement parts are recom-
mended.

5. To remove the old spark plug, turn the wrench

handle in a counterclockwise direction.

NOTE:

Spark plugs should be tightened firmly. Over-
tightening can damage the threads in the
aluminum cylinder head. Also, leaving them
too loose can cause the spark plugs to get
very hot and possibly result in damage to the
engine.

7. Replace the cable by pushing the insulated

connector directly down onto the electrode.
Check to be sure it has snapped into place
and can't fall off.

G070A01A

CAUTION:

Operating your vehicle without a proper air
filter in place can result in excessive engine
wear.

G060C03A-D

G060C04A-D

Содержание 2003 Accent



























































































































































































Результаты поиска

Содержание 2003 Accent

Отзывы:

Hyundai 2003 Accent, Руководство пользователя, Страница: 145 / 186

Результаты поиска

Содержание 2003 Accent

Отзывы: