Hyundai power products HYSC1800E Скачать руководство пользователя

Страница: 9 / 44

www.hyundaipowerproducts.co.uk

Safety Information

Electricity (Continued)

• Power tools plug must match the outlet. Never modify the plug in any way. DO

NOT use any adapter plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric shock.

• DO NOT expose this power tool to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock. DO NOT abuse the power cord. Never

use the cord for carrying, pulling or unplugging the power tool. Keep the cord

away from heat, oil and sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock. When operating a power tool, use an

extension cord suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

•

IMPORTANT:

Make sure that the electric circuit is fused, and that the power,

voltage and frequency of the motor is supported by your mains supply. Also, make

sure that your power supply is earthed. Connect your machine to earth. Never

open the ON/OFF switchbox. However, if it should become necessary to do so,

contact a qualified electrician. Make sure that you will never touch live contacts,

specifically when you plug or unplug your machine. This machine and its power

cord must never get into contact with water.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

•

To prevent electric shock, use only with an extension cord suitable for outdoor

use. For additional protection, the installation of a residual current device (RCD)

having a rated residual operating current not exceeding 30mA is advisable.

•

Before use, check that the extension cord is in good condition. When using an

extension cord, make sure to use one heavy enough to carry the current your

product will draw. An undersized cord will cause a drop in line voltage resulting in

loss of power and overheating.

•

Do not allow any part of the machine to make contact with water while it is in

operation. If the appliance becomes wet while turned off, wipe dry before starting.

Do not touch the appliance or its plug with wet hands or while standing in water.

Wearing rubber boots offers some protection.

•

Before use, check the supply and extension cord for signs of damage or aging. If

the cord becomes damaged during use, disconnect the cord from the supply

immediately. If the supply cord is damaged, it must be replaced by the

manufacturer or a qualified person in order to avoid a hazard.

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation are provided instead of

grounding. No grounding means that it is already provided on a double-insulated

appliance. Servicing a double-insulated appliance requires extreme care and

knowledge of the system, and should be performed only by qualified service

personnel. Replacement parts for a double-insulated appliance must be identical

to the parts they replace.

Содержание HYSC1800E













































Результаты поиска

Содержание HYSC1800E

Отзывы:

Похожие инструкции для HYSC1800E

Бренды по названию

Популярные бренды

Hyundai power products HYSC1800E, Инструкция по эксплуатации

Результаты поиска

Содержание HYSC1800E

Отзывы:

Похожие инструкции для HYSC1800E

Бренды по названию

Популярные бренды