3.
Use the flathead screw driver to pry the spark arrester out from the
muffler
4.
Remove the carbon deposits on the muffler screen and spark
arrester using a wire brush.
5.
Install the muffler screen.
6.
Install the cover
TROUBLE SHOOTING
Engine won’t start
1. Fuel systems
No fuel supplied to combustion chamber.
No fuel in tank….Supply fuel.
Fuel in tank….Fuel tank cap air vent knob to ON, fuel cock knob to ON.
Clogged fuel line….Clean fuel line.
Clogged carburetor….Clean carburetor.
2
．
Engine oil system
Insufficient
Oil level is low….Add engine oil.
3. Electrical systems
Poor spark
Spark plug dirty with carbon or wet….Remove carbon or wipe spark plug dry.
Faulty ignition system….Consult dealer.
4. Compression insufficient
Worn out piston and cylinder….Consult dealer.
Generator won’t produce power
Safety device (AC) to OFF …Stop the engine, then restart.
Safety device (DC) to OFF …Press to reset the DC protector
15
