Hyundai power products HNHP2500SP-195i, Оригинальное руководство пользователя

Страница: 16 / 22

16
7. DISPOSAL
Electrical products should not be disposed of with household products. According to
the European Directive 2012/19/EU for electrical and electronic equipment waste
and its implementation in national law, used electrical products should be collected
separately and disposed of at collection points provided for this purpose. Consult
with your local authorities or your dealer for advice on recycling.
8. TROUBLESHOOTING
This troubleshooting guide can help you solving a problem that occurred on the machine.
If you can't solve the problem, please contact directly the customer service.
Problems Causes Possible solutions
The machine does not
start
The machine is not plugged in Connect the machine to a
suitable outlet
Defective plug
Change the plug or have
your electrical installation
inspected
The fuse is blown
Change the fuse with a
similar one
Defective extension cable Use the machine without the
extension cable and change
the defective cable
Fluctuations of
pressure
The pump sucks the air Check that hoses and fittings
are waterproof.
Dirty, worn or jammed
valves
Contact your service center
The water supply is not enough
Increase the water pressure,
check for blockage of the
hose and / or change the
large hose.
Worn out pump seals The machine stops. The fuse
is blown
The machine stops
The fuse is blown Replace the fuse.
Mains voltage incorrect
Disconnect the other
machines.
Check that the mains voltage
corresponds to the
specification on the
nameplate
Thermal sensor activated Let the machine cool down
for 5 minutes
Jet is partially blocked Clean the jet with a needle
and spray some water toward
the rear through the jet