Hytronik Microwave motion sensor
130
RF transceiver
can serve as both master and slave, which is consist of two parts, RF sensor antenna and main body.
The combination of
SAM8 are designed with sensor antenna separated from the main body, to fit into the narrow
space in flat linear luminaires. The main units HC038V (1-10V control) or HCD038 (DALI control) can be hidden behind the PCB
board for shadow-free installation.
The motion detected by the RF sensor antenna SAM8 will operate all other units programmed on the same group via RF
transmission. The transmission can reach 30 meters indoor and 50 meters in open areas. A daylight sensor is also built-in to prevent
the light switching on when surrounding natural light is sufficient.
RF Sensor Antenna
2
HCD038 (DALI output)
2
SAM8/RC11 (RF grouping by remote control only)
13.5
16
RF antenna
Antenna module
Buzzer
LED indication
Infrared remote receiver
Daylight sensor
Installation hole
Cable entry
32.5
31.2
28.5
19.7
43.3
4.2
52.5
RJ12 connector
N
L
DALI
Push
120
30
21
4.5
110.5
4.5
Sensor Main Body
www.hytronik.com
