Hytorc VERSA 1, Руководство пользователя

Страница: 9 / 18

FOR MORE INFORMATION
HYTORC Nederland BV | Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA | Ysselaarlaan 65B - 2630 Aartselaar - BELGIË | Tel : +32(0)38 - 705 220 | www.hytorc-benelux.be
ENG-versa- User manual.docx Version 2.5 / Mar-16 9
8. USE OF THE LOW CLEARANCE WRENCH
Place the hydraulic cylinder with the low clearance ratchet on the nut and beware to place the
ratchet over the nut completely. Even when the nut is painted or rusted!
8.1 Change the ratchets
The VERSA-series use interchangeable ratcheting links. It is possible to use the hydraulic
cylinder with different sizes of ratchets. Every size has its own ratchet. Before you change the
ratchet, run the pump unit connected to the hydraulic cylinder to retract the pistons to start
position. Change the ratchet as follows:
8.1.1 Versa - Model 1
1. Firmly hold the cylinder and pull out the two safety pins as shown
on the picture.
2. Next you slide the cylinder out of the ratchet. Inside you will find
another safety pin. Push out the pin.
3. You can take the ratchet from the cylinder and replace it for
another one.
4. Before assembling, place the third safety pin inside first. Next,
you slide the cylinder in the ratchet and ensure that the safety
pin holes of cylinder and ratchet are in line.
5. Finally, you replace the safety pins. After changing the ratchet,
you have to test if the hexagon of the tool turns and everything
operates as desired, before placing the tool on the nut.