Hytera X1ei, Руководство пользователя

Страница: 6 / 38

2
2
1
"click"
Before Use
Attaching the Battery
To remove the battery, turn off the radio first. Slide
the battery latch in direction as arrow
①
shows to
unlock the battery, and then remove the battery as
arrow
②
shows.
1
2
Attaching the Antenna
Caution:
Do not hold the radio by its
antenna, otherwise the performance and
lifespan of the antenna will be reduced.
Attaching the Accessories
Caution:
Please attach the accessory
properly; otherwise, waterproof
performance of the radio may get affected.
1. Loosen the screw on the accessory connector
cover to uncover the connector.
2. Align the accessory plug with the connector.
3. Tighten the screw on the accessory plug.
Charging the Battery
Caution:
●
U s e t h e c h a rg e r s p e c i f i e d b y t h e
Company to charge the battery.
●
Make sure the radio is powered off before
charging. Read the Safety Information
Booklet in advance to get necessary
safety information.
● Charge a new batter y for at least
3.5 hours before initial use for best
performance.
Charge the radio (with
battery attached)
Charge the battery
Charging Status Indication (on charger):
LED Indication Charging Status
The LED Indicator flashes red
slowly. Standby (no load)
The LED Indicator glows red. Charging
T h e L E D i n d i c a t o r g l o w s
orange.
90% charged
The LED indicator glows green. Fully charged
The LED Indicator flashes red
rapidly.
Charging failed
Checking the Battery Power
You can check the current battery power by holding
down the programmed
Battery Power Indicator key
preset by your dealer. And release the key to exit.
Battery power indications and alert tone are listed
below:
LED Indication/Tone Battery Power
The LED Indicator glows
green. High
The LED Indicator glows
orange. Medium
The LED Indicator glows red. Low
The LED Indicator glows red
and an alert tone sounds.
The battery runs low.
Please recharge or
replace the battery
for proper radio
operation