Hytera X1e, Руководство пользователя

Страница: 6 / 18

3
Attaching the Battery
To remove the battery, turn off the radio first. Then
slide the lock as
①
shows to release the battery
latch, and take out the battery as
②
shows.
1
2
Checking the Battery Power
You may check the current battery power by holding
down the programmed
Battery Power Indicator key
preset by your dealer. And release the key to exit.
Battery power indications are listed below:
LED Indication Battery Power
The LED Indicator
glows green. High
The LED Indicator
glows orange. Medium
The LED Indicator
glows red. Low
The LED Indicator
glows red and low
battery alert beeps.
Under the low battery
threshold. Please recharge or
replace the battery for proper
radio operation
Attaching the Antenna
Caution: Do not hold the radio by its
antenna, otherwise the performance and
lifespan of the antenna will be reduced.
Attaching the Accessories
Caution: Please attach the accessory
properly; otherwise, waterproof
performance of the radio may get affected.
1. Loose the screw on the accessory connector
cover to uncover the connector.
2. Align the accessory plug with the connector.
3. Tighten the screw on the accessory plug.
Status Indication
LED Indicator
LED Indication Radio Status
The LED indicator
flashes green.
Powering on
The LED indicator
glows green.
Receiving
The LED indicator
glows red.
Transmitting
The LED indicator
flashes orange slowly.
Scanning or roaming
The LED indicator
flashes orange rapidly.
Emergency
The LED indicator
glows orange.
Call hung. During a call,
you can hold down the PTT
key to talk to the other party
before the call hang time
expires.
The LED indicator
glows blue and then
flashes once every
three seconds.
The LED indicator glowing
blue indicates the BT
feature is being started; the
LED indicator flashing blue
once every three seconds
indicates the BT feature is
enabled, but no Bluetooth
device is connected.
The LED indicator
flashes once every
two seconds.
Bluetooth device is
connected.
2
1
"click"