Hytera TC-780 Скачать руководство пользователя страница 42

Страница: 42 / 47

Troubleshooting

Symptom

Solution

Cannot power on the radio.

The operating time is noticeably shorter
than normal performance, even though
the battery is properly charged.

Hear non-group members.

● Send the radio to your dealer to change your CTCSS/CDCSS settings,

and so as your group members.

● The battery has worn out, and It is time to buy a new battery.
● The battery is not fully charged. Be sure to remove the battery from

charger after the charger LED glows green.

●

The battery has run out. Please recharge the battery or replace it with

a new one.

● The battery is not properly installed. Please remove the battery and

attach it again.

Cannot talk to or hear group members.

● Make sure radios have the same channel and the same CTCSS/CDCSS

settings.

● Make sure you are within their communication range.

Noise always on.

● Group members are too far away to receive their call. Please go within the

communication range and re-power on the radio to try.

No voice or low voice while transmitting

● Make sure the volume control knob is positioned properly.
● Send the radio to your dealer for microphone examination.

Содержание TC-780
















































Результаты поиска

Содержание TC-780

Отзывы:

Похожие инструкции для TC-780

Бренды по названию

Популярные бренды

Hytera TC-780, Руководство пользователя

Результаты поиска

Содержание TC-780

Отзывы:

Похожие инструкции для TC-780

Бренды по названию

Популярные бренды