Hytera PD792i-Ex, Руководство пользователя

Страница: 18 / 33

Ending an All Call
In conventional mode and trunking mode, an all call ends
when the Time-out Timer (TOT) expires.
In trunking mode, an all call also ends in any of the
following cases:
l
The calling party ends the call.
l
The call duration exceeds the period preset by your
dealer.
l The base station signal is lost.
Broadcast Call (Trunking Only)
A broadcast call is a special group call to which the
called party cannot respond. Your radio can initiate a
broadcast call only after being authorized by your dealer.
Initiating a Broadcast Call
The following table describes how to initiate a broadcast
call.
Manner Operation
Favorites
1. Go to Menu > Contact >
Favorites
.
2. Select the required group contact,
and then press the OK/Menu key.
3. Select Call Type , and then select
Broadcast Call .
4. Press or press and hold the
PTT key.
Subgroup
1. Press the preprogrammed
Subgroup key or go to Menu >
Subgroup .
2. Select the required subgroup, and
then select Member .
Manner Operation
3. Select the required group contact,
and then press the OK/Menu key.
4. Select Call Type , and then select
Broadcast Call .
5. Press or press and hold the
PTT
key.
Manual Dial
1. Go to Menu > Settings > Radio
Set > Keypad Mode , and then
select Enable .
2. From the home screen, enter the
broadcast call number.
3. Press or or press and hold
the PTT key.
Call Log
1. Go to
Menu
>
Call Logs
>
Outgoing / Incoming > Outgoing
List
/
Incoming List
.
2. Select the required group contact,
and then press the OK/Menu key.
3. Select Call Type , and then select
Broadcast Call .
4. Press or press and hold the
PTT key.
ReDial/BackDial
Call Log
1. From the home screen, press
or (if preprogrammed as the
ReDial or BackDial key).
2. Select the target group contact
from the list, and then press the
OK/Menu key.
3. Select
Call Type
, and then select
Broadcast Call .
4. Press or press and hold the
PTT key.
Receiving a Broadcast Call
In conventional mode, when you receive a broadcast call,
the radio displays . The call is established
automatically. In trunking mode, the radio displays
after the call is established successfully.
Ending a Broadcast Call
A broadcast call ends in any of the following cases:
l The calling party ends the call.
l
The call duration exceeds the period preset by your
dealer.
l
A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
Include Call (Trunking Only)
An include call is a special group call initiated to another
group in call hang time of an ongoing group call, so that
the group joins the ongoing call. Your radio can initiate an
include call only after being authorized by your dealer.
For operations of the include call, see "Group Call" on
page 9.
Call on Analog Channel
(Conventional Only)
You can initiate or receive a call on an analog channel
with or without signaling.
Call Without Signaling
A call without signaling is a call initiated to all the other
users on an analog channel without signaling.
To initiate a call without signaling, do as follows:
14