6
Message Services
This feature enables you to directly send a quick text
message and to forward the messages in the Inbox,
Outbox and Drafts.
Quick Text
The radio supports quick text message preset by your
dealer. You can directly send the message or edit it prior
to sending.
Inbox
The radio saves the received messages into the Inbox
and marks every message with a corresponding icon to
indicate its status.
●
: Read message
●
: Unread message
When the Inbox is full, the radio will display the icon
, and the earliest message will be overwritten by the
latest one automatically.
Outbox
The radio saves the sent messages into the Outbox
and marks every message with a corresponding icon to
indicate its status.
●
: The message is sent successfully.
●
:
The message is not sent successfully. In this
case, you can resend it.
When the Outbox is full, the earliest message will be
overwritten by the latest one automatically.
Troubleshooting
Phenomena
Analysis
Solution
The radio fails to power
on.
The battery may be improperly installed. Remove the battery and then reattach it.
The battery power may be used up.
Recharge or replace the battery.
The battery may be poorly connected due
to dirtied or damaged battery contacts.
Clean the battery contacts. If the problem cannot
be solved, contact your dealer or authorized service
center for inspection and repair.
During receiving,
the voice is weak,
discontinuous or totally
inactive.
The battery voltage may be low.
Recharge or replace the battery.
The volume level may be low.
Increase the volume by rotating the
Volume Control
Knob
.
The antenna may be loosened or
improperly installed.
Reattach the antenna after turning off the radio.
The speaker may be blocked or
damaged.
Clean the surface of the speaker. If the problem
cannot be solved, contact your dealer or authorized
service center for inspection and repair.
You cannot
communicate with other
members.
The frequency or signaling may not
match that of other members.
Set your TX/RX frequency and signaling to the same
as that of other members.
The channel type (digital/analog) may be
set inconsistently.
Make sure all members are on the same digital/
analog channel.
You may be too far away from the group
members.
Move towards other members.
Irrelevant
communication or
noise is heard on the
channel.
You may be interrupted by radios using
the same frequency.
Change the frequency, or adjust the squelch level.
The radio may be set with no signaling.
Set signaling for all member radios to avoid
interference at the same frequency.
The noise is too loud.
You may be too far away from other
members.
Move towards other members.
You may locate in an unfavorable position.
For example, your communication may
be blocked by high buildings or frustrated
in the underground areas.
Move to an open and flat area, and restart the radio
to try again.
You may suffer from external disturbance
(such as electromagnetic interference).
Stay away from equipment that may cause
interference.
GPS positioning fails.
GPS signals may not be received due to
unfavorable position.
Move to an open and flat area to try again.
You cannot use the
keys.
The keypad may fail to function
temporarily.
Restart the radio.
The LCD does not
display any information. The LCD may fail to function temporarily. Restart the radio.
If the above solutions cannot fix your problems, or you may have some other queries, please contact us or your local
dealer for more technical support.
