4.3
Attaching the Belt Clip
Step 1
Remove the screws.
Step 2
Align the screw holes on the belt clip with those on the radio’s back, and then tighten the
screws.
4.4
Attaching the Accessories
Step 1
Open the accessory connector cover as shown below.
Step 2
Align the accessory (such as an audio accessory, or a programming cable) plug with the
accessory connector.
Caution:
Do not scrape the silicone rubber surrounding the accessory connector screw hole, in order
to ensure the waterproof performance of the radio.
Step 3
Tighten the screw on the plug.
